Hey all,
It's been a minute since I've removed and replaced a trans in a W900a (23 yrs of the military). I just purchased an '81 W900A dump truck that I'm positive that the trans isn't set up correctly. The "buggy spring" mount on the top/back of the trans is below the frame rail. My question is that I can't remember if the spring just sits on top of the frame rails or is there a bracket that holds the ends. Needless to say, what little this truck was driven after this trans was installed has ruined the hanger bearing.
Any help is appreciated. If anyone has a picture or parts diagram showing any additional springs on the bolts, plates, etc, that would be great.
“Once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return.”
― Leonardo da Vinci
Wednesday, March 18, 2020 1:59 PM by
dhutch68