General Discussion     Tech Questions     Parts & Services     Suggestions/Ideas     Help & Website Instructions     Blogs    

DT360 specs


http://forum.aths.org/Topic188166.aspx
Print Topic | Close Window

By Jeff W. - Wednesday, April 24, 2019 9:55 AM
Does anyone know the specs and dimensions of the International DT360 engine. Also how it compares to the DT466.

Thanks
By Wolfcreek_Steve - Wednesday, April 24, 2019 4:26 PM
Jeff W. (4/24/2019)
Does anyone know the specs and dimensions of the International DT360 engine. Also how it compares to the DT466.

Thanks
I'm sure others will confirm or deny, but I think it is the same basic block.
By Jeff W. - Thursday, April 25, 2019 1:40 AM
I don't plan on running it out of oil. Because he who checks his oil should not throw a rod. Lol
By 8v149Detroit - Thursday, April 25, 2019 3:41 AM
I've been told that a 360 is only good for a lightly loaded box truck and has enough guts to move its self but that's about it. The 466 on the other hand has been a great engine for us. It seems like they made a million of the 466's
By POWERSTROKE - Saturday, May 18, 2019 3:21 AM
Do a search for an IH forum by Red Power Magazine, get a log-in and ask this question. There's service techs that post to that forum that can assemble IH 300 and 400 series engines blindfolded. Both engines were used in ag and construction equipment as well as trucks. SON drove medium duty trucks ALL over the eastern half of the US one summer. Company bought worn-out soda delivery trucks, lots of DT-466 powered trucks, and some DT-360, and 427 gas engines in a few Chevy's, and SON made the mistake of getting in a DT-360 powered truck once, he claimed the company's only IH 9.0L truck, the full time drivers all had the DT-466's spoken for.
Same design team designed both engines, lots of common design, but I don't think a 466 drops right in where a 360 was.
By kblackav8or - Saturday, May 18, 2019 5:56 PM
The 360 is comparable in size to a 5.9 Cummins. They are solid engines. Same things one does to a Cummins 5.9 12 valve also work on a IH DT360. They will make power. There is a 360 and 466 swap page on Facebook. If you are looking to swap into a pickup the 360 is the one people are using. The 466 takes a lot of work, is 1800lbs and pretty long and tall.